Click image to view full size image
JWP-20 lab mini extruder is for laboratory use, low capacity, 22mm twin screw, with 0.5-10kg/h capacity, ideal for Experimental Study about new material.
Lab extruder : Due to the co-rotating twin-screw has the opposite speed at the meshing point, one screw pulls the material into the meshing gap, and the other screw pushes the material out of the gap, resulting in material from one screw turns to the other screw and advances in a "∞" shape. Since the gap of the meshing zone is small, the speed of the meshing screw and the groove are opposite in direction, so that the cutting speed is high, and the self-cleaning effect is good, that is, any accumulated material adhering to the screw can be scraped off, thereby The residence time of the material is very short, so the twin screw extruder is mainly used for compounding and pelletizing .
Technical parameters
| Type | Dia.(mm) |
L/D |
Speed(rpm) |
Motor(kw) |
Output(kg/hr) |
JWP-20 |
22 |
28-64 |
600 |
4 |
0.15-15 |
Q1. Do you have after-sales support?
A1: Yes, we are happy to provide advice and we also have skilled technicians available across the world.
Q2: How does your factory do regarding quality control?
A: We have a special QC department in charge of products’ quality.
http://www.jinwoextrusion.com/